| Mezzanines |
XMC-FPGA05D |
NA |
IO PMC/XMC Module |
XMC/
VITA-42 |
Range of front panel I/O personality modules (including
ADC, DAC, LVDS, RS-485/422 and Camera Link)
|
Range of front panel I/O personality modules (including
ADC, DAC, LVDS, RS-485/422 and Camera Link) |
Xilinx Virtex-5 SX95T |
| FMC-520 |
NA |
Quad/Dual Channel Analog Ouput |
FMC/VITA 57 |
- |
Four analog output channels updating at 500MSPS, or two analog output channels updating at 1.0GSPS |
775MHz output bandwidth |
| ADC513 |
NA |
Analog Signal Acquisition |
FMC/VITA 57 |
4 channels, 8-bit, up to 1.5GSPS/channel |
- |
- |
| ADC512 |
NA |
Analog Signal Acquisition |
FMC/VITA 57 |
2 channels, 8-bit, up to 3GSPS/channel |
- |
- |
| ADC511 |
NA |
Analog Signal Acquisition |
FMC/VITA 57 |
2 channels, 14-bit, up to 400MSPS/channel |
- |
Onboard clock |
| ADC510 |
NA |
MSPS Signal Acquisition |
FMC/VITA 57 |
2 channels, 12-bit, up to 500 MSPS/channel |
- |
Onboard and external clock sources |
| AD1520 |
NA |
GSPS Signal Acquisition |
XMC and PMC |
2 channels, 8-bit, up to 1.5GSPS/channel |
- |
Xilinx Virtex-5 LX110T/SX95T FPGA |
| AD1500 |
NA |
GSPS Signal Acquisition |
XMC and PMC |
2 channels, 8-bit, up to 1.5GSPS/channel |
- |
Xilinx Virtex-5 LX110T/SX95T FPGA |
| AD3000 |
NA |
GSPS Signal Acquisition |
XMC and PMC |
1 channel, 8-bit, up to 3.0GSPS |
- |
Xilinx Virtex-5 LX110T/SX95T FPGA |
| XCLK1 |
NA |
Multi-channel Clock Generator |
XMC and PMC |
- |
Up to 6 phase matched RF outputs |
RF clock outputs to >2GHz |
| FMC-XCLK2 |
NA |
Multi-channel Clock Generator |
FMC/VITA 57.1 |
- |
Up to 4 phase matched RF outputs |
RF clock outputs to >2GHz |
| PMC-E2201 |
PMR200 |
MSPS Signal acquisition and digital receiver |
PMC
|
2 simultaneous independent channels, 16-bit, up to 160 MSPS/channel
|
-
|
- |
| PMC-E2202 |
PMR400 |
160 MSPS Signal acquisition and digital receiver |
PMC
|
2 or 4
simultaneous independent channels, 16-bit, up to 160 MSPS/channel
|
-
|
- |
| PMC-E2000 |
LM1 |
Analog input/analog output |
PMC
|
8 channels, 200 kSPS/Channel, 16-bit resolution, simultaneous sampling
|
4 channels, 300 kSPS, 16-bit resolution, simultaneous sampling
|
- |
| PMC-E2001 |
LM7 |
Delta-Sigma Analog input/analog output |
PMC
|
4 differential channels, 16-bits, up to 96 kHz |
16 single-ended or 8 pseudo-differential channels, 16-bits, up to 108 kSPS
|
- |
| PMC-E2200 |
RAD2 |
MSPS Signal acquisition and digital receiver |
PMC
|
2 simultaneous independent channels, 14-bit, up to 105 MSPS/channel |
-
|
Virtex II XC2V3000 |
| PMC-E2600 |
RAD-T2 |
MSPS digital transmitter |
PMC
|
- |
2 simultaneous independent channels, 14-bit, up to 200 MHz
|
Virtex II XC2V3000 |
| ADC-MOD2 |
NA |
MSPS Signal Acquisition |
I/O Module |
2 channels, 14-bit, up to 125 MSPS/channel |
- |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| DAC-MOD1 |
NA |
MSPS Analog output |
I/O Module |
- |
2 channels, 14-bit, up to 210 MSPS/channel |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| SFM |
NA |
Multi-channel Serial FPDP |
XMC and PMC |
2 or 4 channels of 2.5Gbps fiber optic |
2 or 4 channels of 2.5Gbps fiber optic |
|
| DPIO2 |
NA |
Digital Parallel I/O |
PMC |
FPDP/FPDPII, LVDS, RS-422/485, PECL or custom interface |
FPDP/FPDPII, LVDS, RS-422/485, PECL or custom interface |
|
| PMC-FPGA05 |
NA |
Determined by I/O Module |
PMC |
Based on I/O module or custom interface |
Based on I/O module or custom interface |
Xilinx Virtex-5 LX110 |
| XMC-FPGA05F |
NA |
Multi-channel fiber-optic |
XMC and PMC |
4 fiber-optic |
4 fiber-optic |
Xilinx Virtex-5 SX95T, LX155T or FX100T |
| LVDS-MOD3 |
NA |
Low Voltage Differential Signalling |
I/O Module |
64 I/O lines routed as 32 differential pairs |
64 I/O lines routed as 32 differential pairs |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| LVDS-MOD4 |
NA |
Low Voltage Differential Signalling |
I/O Module |
134 I/O lines routed as 64 differential pairs |
134 I/O lines routed as 64 differential pairs |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| LVDS-MOD5 |
NA |
Low Voltage Differential Signalling |
I/O Module |
Up to 52 differential pairs or 104 single-ended signals |
Up to 52 differential pairs or 104 single-ended signals |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| RS485-MOD2 |
NA |
EIA-422 and EIA-485 |
I/O Module |
33 Channels of EIA-485/422B |
33 Channels of EIA-485/422B |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| CAML-MOD3 |
NA |
Camera Link |
I/O Module |
Base, Medium and Full mode Camera Link, up to 85MHz clock rate |
Base, Medium and Full mode Camera Link, up to 85MHz clock rate |
for use with the PMC-FPGA05 and PMC-FPGA03 |
| PMC-FPGA03 |
NA |
Determined by I/O Module |
PMC |
Based on I/O module or custom interface |
Based on I/O module or custom interface |
Xilinx Virtex-II Pro XC2VP50 |
| PMC-FPGA03F |
NA |
Multi-channel fiber-optic |
PMC |
4 fiber-optic |
4 fiber-optic |
Xilinx Virtex-II Pro XC2VP50 |
| V1020 |
NA |
10Gb Ethernet |
XMC and PMC |
10Gbe |
10Gbe |
Xilinx Virtex-II Pro XC2VP50 for aggregation of packet processing |
| VME |
| SVME-E2102 |
VGS932 |
Programmable multi-channel digital I/O |
VME
|
32 opto-isolated channels |
32 or 16 opto-isolated. Mechanical or solid-state relays
|
- |
| SVME-E2104 |
VGS912 |
Multi-channel Analog I/O |
VME
|
32 single-ended or 16 differential, 16-bits |
4 single-ended, 16 bits
|
-
|
| MM-6463D |
NA |
Multi-channel Analog I/O |
VME |
6 chennels, 14-bit, up to 105MHz/channel |
- |
Up to 8GB memory,
Onboard 350MHz PowerPC processor |
| MM-6467D |
NA |
Multi-channel Serial FPDP |
VME |
4 channels of 2.5Gb Serial FPDP |
4 channels of 2.5Gb Serial FPDP |
Up to 8GB memory,
Onboard 350MHz PowerPC processor |
| MM-6466D |
NA |
Multi-channel Fibre Channel |
VME |
4 channels of fiber channel |
4 channels of fiber channel |
Up to 8GB memory,
Onboard 350MHz PowerPC processor |
| CSW1 |
NA |
Multi-channel fiber-optic |
VXS/VITA 41 Switch |
12 channels of fiber-optic |
12 channels of fiber-optic |
|
