Home
Share

ADC512 Dual Channel Analog Input FMC

The ADC512 provides system developers with ability to directly connect analog input with FPGA based embedded processing nodes. As the ADC512 is part of a range of modular I/O solutions conforming to the VITA 57 FMC standard, developers can change I/O formats by changing relatively low cost modules while the more expensive host processing cards remain the same. This allows developers to reuse host firmware and software elements from previous projects thus reducing cost, development times and risk. Typical DSP applications for this module include Signal Intelligence (SIGINT), Electronic Counter Measures (ECM), and Radar.

Related Products

XCLK1 Multi-Channel Clock Generator

The XCLK1 is a high frequency clock generator PMC/XMC module that is able to provide up to six synchronized sample clocks for high speed I/O products such as analog to digital converters.

FMC-XCLK2 Multi-Channel Clock Generator

The FMC-XCLK2 is a high frequency clock generator FMC module that is able to provide up to four synchronized sample clocks for high speed I/O products such as analog to digital converters.

ADC510 Dual Channel Analog Input FMC

The ADC510 enables integration of dual channels of analog input into embedded computing systems. Typical DSP applications for this module include Signal Intelligence (SIGINT), Electronic Counter Measures (ECM), and Radar.

ADC511 Dual Channel Analog Input FMC

The ADC511 provides system developers with ability to directly connect analog input with FPGA based embedded processing nodes. Typical DSP applications for this module include Signal Intelligence (SIGINT), Electronic Counter Measures (ECM), and Radar.

ADC513 Quad Channel Analog Input FMC

The ADC513 provides system developers with ability to directly connect analog input with FPGA based embedded processing nodes. Typical DSP applications for this module include Signal Intelligence (SIGINT), Electronic Counter Measures (ECM), and Radar.

FMC-520 Quad/Dual Channel Analog Output

The FMC-520 integrates two or four channels of analog output into embedded computing systems, dependant on the output conversion rate selected. Typical DSP applications for this module include Software Radio, Signal Intelligence / Electronic Warfare, Electronic Counter Measures, and Radar.

FPE650 6U VPX

The FPE650 is a quad FPGA processor card which combines high performance and high bandwidth I/O in a flexible format.

FPE320 3U VPX

The FPE320 is a 3U VPX FPGA processor board that incorporates the largest Xilinx Virtex-5 FPGAs available with an FMC mezzanine site.

HPE720 VPX, Virtex5, 8640

The HPE720 high performance hybrid processing engine coupling two Xilinx Virtex-5 FPGAs with a dual-core Freescale Power Architecture™ MPC8640D.

Related Capabilities

Ruggedization

Engineering and manufacturing advanced, embedded computing products for harsh military applications requires a breadth of expertize and hands-on experience that only an industry leader like CWCDS can command.

Lead-Free

Curtiss-Wright Controls is committed to maintaining the high reliability of its products for the aerospace & defense (A&D) sector with respect to lead-free products.

Resource Center

ADC512 datasheet

Analog I/O fact sheet

Measuring the FMC Standard Up Against the PMC/XMC Format for Embedded Defense/Aerospace Applications

Interoperability Considerations Between Different Host FMC and FMC Mezzanine Vendors

PDF Icon Military Embedded Systems, August 2011 - Understanding FMC Interoperability

PDF Icon 03/02/09 - Curtiss-Wright Controls Announces Its High Sampling Rate Dual-Channel ADC FMC Card for Rugged DSP Applications


Support

To contact our main Technical Support office
8AM-5PM EST: Phone: (866) 298-2066 or
(613) 254-5150
Fax: (613) 599-7777
Email: support@curtisswright.com

To contact our UK-based Support office,
9AM-5:30PM GMT: Phone: +44 (0) 1494 469347

Enter the Continuum Support Center website for
technical documentation and software packages.

Sales

© 2011 Curtiss-Wright Controls, Inc. All Rights Reserved - sitemap