CHAMP-AV5 6U VME
The CHAMP-AV5 multi-processing board brings the floating-point performance of the Intel® Core i7™ architecture to VME64x form factor standard. Utilizing a pair of 2.53GHz dual-core Core i7 processors, the CHAMP-AV5 delivers up to 81 GFLOPs of performance. The 17GB/s (peak) DDR3 memory sub-system supports applications with high memory utilization and streaming data I/O.
Specifications
- Two Intel dual-core Core i7 processors at up to 2.53GHz
- 2 Gbytes DDR3 SDRAM with ECC per processor
- 8GB NAND Flash on SATA per processor
- 256 Kbytes NVRAM
- Secure write-protection/declassify on all non-volatile memory
- PCI Express local fabric with 2GB/s bi-directional inter-processor bandwidth
- Four channel PCIe DMA controller to off-load CPUs
- Gigabit Ethernet (1000BASE-T) per processor
- Two mezzanine sites
- One XMC/PMC (PCIe x4, 133MHz PCI-X)
- One XMC (PCIe x8)
- Four EIA-232/422/485 serial ports
- Three USB 2.0 interfaces
- One external SATA port
- Eight LVTTL I/O signals with interrupt
- Power consumption & temperature sensors
- VME64x, 2eVME, and 2eSST protocols
- VxWorks® BSP supporting SMP
- Wind River Linux
- Continuum Vector SSE optimized DSP function library
Block Diagram
Applications
Related Products
SVME/DMV-1905 6U VME Intel Core i7
The SVME/DMV-1905 from Curtiss-Wright Controls supports Intel’s next generation Core i7 processor with SSE 4.2 floating point performance.
StarLink II
The StarLink PMC allows customers to build multi-board DSP, and SBC systems with a 5 Gbps switched fabric providing links between all the computing nodes.
XMC-FPGA05D XMC/PMC
The XMC-FPGA05D is a high density I/O PMC/XMC module, supported by a user programmable Virtex-5 FPGA. The board may be used as a PMC with a 64-bit, 133MHz PCI-X interface to the host or as an XMC module supporting a x8 PCI Express interface to the host.
XMC-FPGA05F Virtex-5 XMC
Incorporating quad fiber-optic transceivers with a user programmable Xilinx Virtex-5 FPGA, the XMC-FPGA05F XMC/PMC module combines data processing and I/O in a single module.
XMC-710 Dual Output Input Graphics XMC
The XMC-710 is a VITA 42.3, PCI Express based XMC form factor, ruggedized, high-performance, dual output, graphics controller with video capture capability.
PMC-E2200 2x 105MSPS 14b ADC PMC
The PMC-E2200 digital receiver PMC is a leading solution for acquisition of high-speed analog signals in Radar, Software Radio and signal Intelligence applications.
PMC-E2202 4x 160MSPS 16b ADC PMC
The PMC-E2202 digital receiver XMC/PMC is a leading solution for acquisition of high-speed analog signals in Radar, Software Radio and signal Intelligence applications.
AD1520 1.5GSPS 8-bit ADC
The AD1520 closely couples a high performance Xilinx Virtex-5 FPGA to a dual channel high-speed analog input front end providing both processing and up to 1.5GSPS acquisition (per channel) in a single XMC/PMC card.
AD3000 3GSPS 8-bit ADC
The AD3000 closely couples a high performance Xilinx Virtex-5 FPGA to a high-speed analog input front end providing both processing and up to 3 GSPS acquisition in a single XMC/PMC card.
PMC-650 Rugged Ethernet Mezzanine Switch
The PMC-650 is an eight-port rugged Gigabit Ethernet Switch and is a part of a family of Gigabit Ethernet switching and routing products from Curtiss Wright Controls Defense Solutions.
SVME/DMV-682 Ethernet Switch/Router
The SVME/DMV-682 FireBlade provides Systems Integrators with a fast, secure and unified approach to interconnect subsystems, chassis, cards, and compute nodes within any given platform using 1 Gigabit Ethernet links.
Related Capabilities
Trusted COTS
The Trusted COTS™ Program is designed to address the protection of critical military technologies and data for our customers, on a worldwide basis.
Ruggedization
Engineering and manufacturing advanced, embedded computing products for harsh military applications requires a breadth of expertize and hands-on experience that only an industry leader like CWCDS can command.
Lead-Free
Curtiss-Wright Controls is committed to maintaining the high reliability of its products for the aerospace & defense (A&D) sector with respect to lead-free products.
Downloads
Support To contact our main Technical Support office To contact our UK-based Support office, Enter the Continuum Support Center website for |
Sales |