Digital Signal Processors
Curtiss-Wright Controls' Advanced Multi-Computing business unit builds high-performance digital signal processing computing solutions tailored to the needs of the most demanding defense applications such as radar, sonar, signal intelligence and image processing. Our digital signal processing products are founded on the principle of focusing on high-integrity design aimed at harsh environment applications, backed by customer support and lifecycle management to support the programmatic needs of defense customers.
Intel-Based DSP
Product
Processor(s)
Memory
I/O
Ruggedization
Dual Intel core i7, 610e @2.53GHz
4GB DDR3 SDRAM, 16GB Flash
1x XMC, 1x XMC/PMC, 4x EIA-232, 2x Gbe, 2x USB, 1x SATA, 8x LVTTL I/O
AC 0, AC 100 , CC 100, CC 200
Dual Intel core i7, 2715QE @2.1GHz
8GB-16GB DDR3 SDRAM, 16GB Flash
1x XMC, 4x EIA-232,2x EIA-422,4x Gbe, 3x USB, 2x SATA, 16x LVTTL I/O
AC 0, AC 100 , CC 100, CC 200
_______________________________________________________________________________
GPU-based DSP
Product
GPU
Memory
I/O
Ruggedization
NVIDIA Fermi 240 cores (2)
2GB GDDR5 (2)
Dual x16 PCIe, dual DVI, IPMI
AC 0, AC 100 , CC 200
_______________________________________________________________________________
PowerPC-Based DSP
Product
Processor(s)
Memory
I/O
Ruggedization
Quad 8640 1GHz
4GB DDR3 SDRAM, 16GB Flash
1x XMC, 1x XMC/PMC, 4x EIA-232, 2x Gbe, 2x USB, 1x SATA, 8x LVTTL I/O
AC 0, 100 , CC 100, 200
Quad 7447A/7448 @1 GHz - 1.25GHz
Up to 2 GB DDR SDRAM, 256MB Flash
2x 64-bit/100MHz PMC, 4x EIA-232, 2x Gbe On-board Switch, 8x LVTTL I/O
AC 0, 100, CC 100, 200
8640 1GHz - 1.0GHz, 2x Virtex-5 FPGAs (SX240T, LX330T)
8640: 2GB DDR2 SDRAM, 128MB Flash and 128KB NvSRAM, per FPGA: 4x 9MB QDRII SRAM, 2x 512MB DDR2 and 16MB Flash
2x FMC OR 1x FMC and 1 P/XMC, 2x Gbe onboard, RocketIO, 4x SRIO, 1x 8-lane PCIe
AC L0
8641D, 1x Virtex-5 FPGAs
8641: 2GB DDR2 SDRAM and 128MB Flash, per FPGA: 4x 9MB QDRII SRAM, 2x 128MB DDR2 SDRAM, 32MB Flash
1x P/XMC, 2x Gbe onboard, 1x EIA-232, RocketIO, VME
AC 0, CC 100
_______________________________________________________________________________
FPGA-Based DSP
Product
Processor(s)
Memory
I/O
Ruggedization
8640 1GHz - 1.0GHz, 2x Virtex-6 FPGAs (SX475T)
8640: 1GB DDR2 SDRAM, 256MB Flash and 128KB NvSRAM, per FPGA: 4x 18MB QDRII+ SRAM, 2x 2GB DDR3
2x FMC , 2x GBE-X, 2x GBE-T, Four x4 RocketIO(per FPGA), Four x4 SRIO, 1x 8-lane PCIe
AC L0, ACL100, CCL100, CCL200, CCL300
Dual-Core 8640D 1GHz, Xilinx Virtex-5 (LX155T or SX95T)
8640: 1 GB DDR2 SDRAM Across two banks, FPGAs: 512 MB DDR2 SDRAM, 18 MB QDR-II+ SRAM across two banks
Two 4-lane PCI Express links (One link may be configured for Serial RapidIO) to backplane, 8-lane PCIe XMC, 2 x EIA-232, 2 x Gbe, 2 x 4-lane RocketIO to backplane, 18-pairs LVDS DIO
AC 0, AC 100, CC 100, CC 200
Dual-Core 8641D 1GHz, Dual Xilinx Virtex-5 LXT (LX110T, LX220T)
8641: 512 MB or 1 GB DDR2 Across two banks, FPGAs: 512 MB DDR2 SDRAM across two banks per FPGA, 36 MB QDR-II+ SRAM per FPGA across four banks
Four 4-lane Serial RapidIO links, 8-lane PCIe or 4-lane SRIO XMC; Processor: 4-lane Serial RapidIO to Fabric, 1 x EIA-232, 1 x EIA-422/232, 2 x Gbe, 16 LTTL DIO; FPGAs: 4-lane Serial RapidIO to fabric, 4-lane RocketIO, 36-pairs LVDS DIO from each FPGA
AC 0, AC 100, CC 100, CC 200, CC 300
8640 or 8641 1GHz - 1.33GHz, 2x Virtex-5 FPGAs
8641: 2GB DDR2 SDRAM, 128MB Flash and 128KB NvSRAM, per FPGA: 4x 9MB QDRII SRAM, 2x 512MB DDR2 and 16MB Flash
2x FMC OR 1x FMC and 1 P/XMC, 2x Gbe onboard, RocketIO, 2x SRIO, 1x 8-lane PCIe
AC 0
Xilinx Virtex-5 (SX240T, 220/330T) FPGA
2x 9MB QDR-II SRAM, 2x 356-512MB DDR2 SDRAM
1x FMC, RocketIO, 16 Diff. Pairs, 1x EIA-232
AC 0, AC 0, AC L100, CCL200
Quad Xilinx Virtex-5 (SX95T, LX155T or FX100T) FPGAs
FPGA 1&3: 2x 128Mx16-bit SDRAM, 2x 128Mx 24-bit SDRAM, 2x 4Mx18-bit SRAM, 128MB Flash; FPGA 2&4: 4x 4Mx18-bit SRAM
2x FMCs, RocketIO, 20 Diff. Pairs for FPGAs 1 & 3, 4x Gbe
AC 0, CC 100
Dual Xilinx VP70/100
Up to 512 MB DDR SDRAM, Up to 9MB DDR-II SRAM per FPGA
2 x 64-bit/66MHz PMC, 1 x EIA-232, StarFabric, RocketIO
AC 0, AC 100, CC 100, CC 200
8641D, 1x Virtex-5 FPGAs
8641: 2GB DDR2 SDRAM and 128MB Flash, per FPGA: 4x 9MB QDRII SRAM, 2x 128MB DDR2 SDRAM, 32MB Flash
1x P/XMC, 2x Gbe onboard, 1x EIA-232, RocketIO, VME
AC 0, CC 100
Single Xilinx Virtex-5 SXT (SX50T/SX95T)
Up to 256 MB DDR2 SDRAM, 18 MB SRAM Across two banks
80-bits front-panel VDS/LVTTL (40 pairs), 48-bits rear-panel LVDS/LVTTL (24 pairs), x4 PCIe
AC 0, AC 100, CC 100, CC 200, CC 300
Xilinx VP40
Up to 256 MB DDR SDRAM
33/66 MHz PCI, 2.5 GB/sec Front-panel RocketIO, 2 GB/sec Rear-panel RocketIO, 30-bits front-panel LVDS/LVTTL (15 pairs), 48-bits rear-panel LVDS/LVTTL (24 pairs)
AC 0, AC 100, CC 100, CC 200
Xilinx Virtex-II Pro XC2VP50
2x 64MB DDR SDRAM, 3x 2Mx18-bit QDR-II SRAM
138 Signals to front panel or RocketIO to front panel, 64-bit 66MHz PCI, 64-bit User I/O on PMC P14
AC 0
Xilinx Virtex-II Pro XC2VP50
2x 64MB DDR SDRAM, 3x 2Mx18-bit QDR-II SRAM
4 fiber-optic on front panel, 64-bit 66MHz PCI, 64-bit User I/O on PMC P14
AC 0
Xilinx Virtex-5 LX110T/SX95T FPGA
Dual banks of 36b QDR2 SRAM and 16b DDR2 SDRAM memories
N/A
AC L0, AC L100, CC L100 (contact factory for availability)
Xilinx Virtex-5 SX95T
Two banks of 9Mbytes 250MHz QDR2 SRAM memory; Two banks of 128Mbytes 250MHz DDR2 SDRAM memory
Range of front panel I/O personality modules (including ADC, DAC, LVDS, RS-485/422 and Camera Link)
N/A
_______________________________________________________________________________
Continuum Software
Product
Description
Continuum Insights™ is a suite of software tools that aid the software development for multi-processor systems. Insights provides programmers visibility into the entire system via the collection of critical, periodic, non-intrusive, real-time data.
The Interprocessor Communication (Continuum IPC) Library provides all the capabilities needed to control applications running on multiple processors having data movement requirements. Currently supported fabrics and interconnects include PCI, StarFabric, Serial RapidIO and PCI Express.
The Curtiss-Wright DSP function library, Continuum Vector, provides a comprehensive set of C-callable functions which have been optimized to exploit the performance of the SIMD instruction sets of Power Architecture (Altivec) and Intel (SSE) processors.
_______________________________________________________________________________
Legacy Products
Product
Processor(s)
Memory
I/O
Ruggedization
2x 7447A/7448 1GHz, 2x Virtex-II Pro FPGAs
per 744x: 256MB SDRAM and 64MB Flash, per FPGA: 128MB DDR SDRAM and 4x 2MB QDR SRAM
1 PMC, 2x EIA-422, 2x EIA-232, 2x Gbe onboard, RocketIO, VME
AC 0, CC 100
7447A, Xilinx Virtex-II Pro XC2VP70
7447A: 512MB SDRAM, 64MB Flash; FPGA: 128MB SDRAM, 4x 4MB QDR SRAM
1x EIA-232, 1x EIA-422, 1x I2O, RocketIO, 32-bit 33MHz PCI to backplane, 2x Ethernet
AC 0, CC 100
_______________________________________________________________________________