Home

SVME/DMV-183 Dual Freescale 7447A/7448

The SVME/DMV-183 uses single or dual Freescale MPC7447A/7448 PowerPC™ processors with AltiVec™ technology and up to 2 GB of state-of-the-art DDR SDRAM. The 183 provides two 64-bit PMC sites, one supporting 100 MHz PCI-X, and an innovative complement of I/O capability such as Gigabit Ethernet, up to six serial ports, up to two 1553 channels, SCSI, Serial ATA, and two USB 2.0 ports. Available in a full range of environmental build grades the 183 is targeted to the challenging data- and digital signal-processing needs of tactical aircraft, armored vehicles and harsh environment naval systems.


Specifications

  • Single or dual PowerPC™ 7447A/7448 (AltiVec Technology™-enhanced) CPUs, each with:
    • 64 KB L1 cache
    • 512 KB/1 MB internal L2 cache
    • ECC option on 7448 internal L2 cache
    • Altivec™-enabled e600 core (previously referred to as G4 core)
    • 9.6 GFLOPS peak processing power at 1.2 GHz core frequency
  • High-performance Discovery III system controller
    • dedicated CPU-to-SDRAM path reduces memory read latency
  • Up to 2 GB of DDR SDRAM with ECC
  • Up to 512 MB of contiguous direct-mapped Flash
  • 128 KB AutoStore nvSRAM with hardware write protection
  • Three Ethernet interfaces:
    • one 10/100BaseTX to front panel
    • one GbE to P0 connector
    • one to P2 either 10/100BaseTx or GbE depending on pin-out mode
  • Two 64-bit PMCs on independent PCI buses
    • one 100 MHz PCI-X, one 66 MHz PCI-X
    • optimized cooling of conduction-cooled PMCs
    • controlled impedance routing of Pn4 I/O for digital video, StarFabric, Fibre Channel and other high-speed interfaces
Related Products

SVME/DMV-184 Freescale 8641

SVME/DMV-184 combines the performance and the advanced I/O capabilities of the Freescale 8641 processor with an extensive I/O complement to provide a highly capable processing platform for a wide range of embedded military/aerospace applications.

SVME/DMV-186 Freescale QorIQ P4040/4080

CWCDS's VME-186 is the most advanced VME SBC harnessing the power and performance of Freescale's QorIQ P4080 Communications Processor.

Continuum Vector

Continuum Vector greatly simplifies the effort associated with porting existing software from other platforms to CWCDS hardware. Many functions are available in both single and double precision arithmetic.

PMC-1553-CW

The PMC-1553-CW module is a rugged, reliable, full featured, PCI Mezzanine (PMC) module designed to provide a stand-alone, flight ready MIL-STD-1553A/B interface for avionics applications.

PMC-429-CW ARINC Card

The PMC-429-CW module is a rugged, reliable, full featured, PCI Mezzanine (PMC) module designed to provide a stand-alone, flight ready ARINC429 interface.

PMC-706 Dual Output Graphics PMC

PMC-706 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC.

PMC-704 Dual Input Output Graphics PMC

The PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC.

SPMC/DPMC-214

The PMC-214 provides 4 CANBus or MilCAN ports along with the US Army standard Utility Bus (optional) and TTL I/O functionality for use in military and aerospace embedded computing applications.

Related Capabilities

RADHARD Ready COTS

Curtiss-Wright provides radiation tolerant products and systems to rugged military embedded applications.

Ruggedization

Engineering and manufacturing advanced, embedded computing products for harsh military applications requires a breadth of expertize and hands-on experience that only an industry leader like CWCDS can command.

Safety Certifiable

Curtiss-Wright has invested heavily in the people and infrastructure to efficiently deliver products for safety critical applications.

Modified COTS

The Curtiss-Wright MCOTS IPT offers unmatched design and development expertise for tailored rugged computers.

Downloads


Support

To contact our main Technical Support office
8AM-5PM EST: Phone: (866) 298-2066 or
(613) 254-5150
Fax: (613) 599-7777
Email: support@curtisswright.com

To contact our UK-based Support office,
9AM-5:30PM GMT: Phone: +44 (0) 1494 469347

Enter the Continuum Support Center website for
technical documentation and software packages.

Sales


© 2011 Curtiss-Wright Controls, Inc. All Rights Reserved - sitemap